Any model railway "world" has to end somewhere. A backscene gives it a way to end with an image that is in keeping with the rest of the railway.

Our first backscene is behind Clanfield station and separates the railway "main" from the fiddle yard. There had been a raised panel at one end for a while, on the reverse of which is mounted the PC and display. To put in a backscene, I simply added small timber uprights every foot (30cm) or so then added a hardboard front. The hardboard was glued & screwed to the uprights, and is approximately 12 inches long. The scene gentle curves at each end.

Where should the image come from? Well I'm a beginner at this, so a ready made product was appropriate. I'm not at all artistic, so painting my own was a non starter. (Remember I'm the one who, in art classes, was told off for painting the walls of the classroom in magnolia..) What I needed was an image 10' long (approx 3m) x 1' high. Gaugemaster have introduced a range of scenic products, and have a range of backscenes. The village backscene was exactly the effect needed, but was only 9' long. Unfortunately, the other backscenes they do have different horizon heights.ย Adding the start of another village onto the end seemed to be the best thing to do.

The backscene comes in three strips. Each was glued in place, using a spray glue such as can be used for photo mounting. Unfortunately it has a tendency to go everywhere, and once glued on the edges have to be protected using masking tape when the next is sprayed. the glue doesn't have "give" so get it right first time!

backscene_clanfield_

The track enters and exits the railway through the backscene. I've simply added tunnel portals. At one end of the railway, there will be raised terrain so it won't look entirely inappropriate. On the picture above it may look a little out of place. A bridge or something else could still be credible alternatives.

Using This Site

Searching

The web site can be searched: type a search term (e.g. "DAC10") into the search box on the right hand side of the header, and hit enter. the search engine will find words matching the search string in the main body of the site, but it won't search attached documents (e.g. the product manuals).

"Read More"

Many articles are displayed one after the other. some are quite short, and say "read more" at the bottom. Click that to read the remainder of the article.